Showing posts with label 8-string. Show all posts
Showing posts with label 8-string. Show all posts
Thursday, February 11, 2010
INTERVIEW: Meshuggah's Marten Hagstrom
Meshuggah’s distinctive brand of crunchy, intense, precise, complex metal has set heads banging for over 20 years now. Riding high from the success of sixth studio album obZen (2008), Meshuggah is almost ready to finally guide the tour bus towards the off ramp and begin work on the follow up – but not before they hit Australia for the Soundwave festival and sideshows (as well as a few gigs in New Zealand) I caught up with guitarist Marten Hagstrom on February 10 to discuss writing, recording, and the past and future of Meshuggah’s distinctive custom Ibanez 8-string guitars.
Is Soundwave the last of the touring cycle?
Yeah it actually this. This is finishing off the obZen touring cycle for us. We’re really looking forward to it. Last time we were in Australia was great and we’re hoping it will be the same this time. Getting some nice weather in and getting out of Sweden right now seems like a good thing.
I dunno, it’s pretty freakin’ hot here right now.
Well we’ve got snow up to our waists. This has been the coldest winter in a long time up here!
So have you already started working on the next album?
No not really. We’re one of those bands who, we don’t really work a lot on material when we’re still in the touring cycle. We’ve got some stuff that we didn’t really get to finish for the obZen album and some of it feels like it belongs to that album so we probably won’t use that, but we’ve got a couple of things that still feel really fresh so we’re gonna work a little bit on that when we get back. But most importantly we’re just gonna have to sit down and start focusing on the writing because, coming to the end of the tour cycle we switch modes and switch focus. It’s like, we’re done with all the live stuff, now we can just take a little breather for a week or two then start to get a feel for what we want out of the next album. So still it’s very early on. The only thing we’ve really accomplished as far as the next recording goes is we’ve rebuilt our studio a little bit to accommodate what we want out of the recording. But as far as writing we haven’t done much yet.
Well as a geek who writes for music mags, I like this kind of stuff, so what have you done to the studio?
We have this studio here in Stockholm. It’s two stories, and the recording room is down in the basement, so a couple of years ago we ripped out the whole basement and just started from scratch and built a real studio the best way we could. We had some help from the outside as far as how we were going to construct it but we did all the carpentry and all the work ourselves. The room itself turned out to be great but we knew beforehand that we were not going to get a perfect result to begin with. So what we did was we finished it, we rehearsed in it and we tried to get the feel of the room, and now we had this guy who has built a lot of studios here in Sweden, he’s like a wizard, an old guy, and he was like, “Well you need diffusers here and there, and this type, and you need to order it from here,” and whatever. So we ordered a shitload of stuff and then we took, like, two weeks to get everything up on the walls so we could get the acoustics we wanted. We’ve gotten pretty close, we’ve just got some minor details to fix. Most of it’s been carpentry, putting up diffusers in the whole room.
Everyone was worried that studio recording in general was on its way out, with Pro Tools, plug-ins and that sort of stuff, but it seems everyone’s building their own actual studio these days.
Yeah. It’s a good trend, I think. Obviously it’s a bad thing for a lot of studios, but on the other hand, we can see it: we’ve got a studio of our own and we’ve been working in this studio since the Nothing album. So we’ve done it for quite a while. But the thing is that these old massive studios, they’re pretty expensive. And if you’re a band that know a little bit about what you want out of things, you don’t need to go to the most costly and flashy and expensive and exclusive studio to get the right result. So it makes sense for guys who are really interested in producing themselves and getting into the tactical and technical aspects of being in a band, and pretty much take the responsibility over your own productions. We’ve been doing that all the time but it took a while for us to find a place to actually build our studio. I would say that a lot of major studios have gone down the drain but for every one that does that there’s, like, five or six small studios, that a lot of times bands own, that pop up. We’ve been getting quite a lot of requests from bands wanting to record here at our place, so there’s still a need for studios, it’s just how you build the studio. It’s easier for people to do it on their own. Back in the day that was impossible. You had to have a lot of fucking money to do that, and now that’s not the case. I would say that some artists, some bands, there are always a couple of guys who are really tech nerds who really go for that stuff. A lot of guys see it as an opportunity to invest some of the money that you bring in playing in the band to build the studio up. But most of the time we turn bands down when they ask to record there. We’re sharing it with Clawfinger, who are friends of ours. And [sharing the studio with other bands] takes up so much time from the studio, because we built it for ours and their sake, so 90 percent of what’s going on in the studio is about Clawfinger and Meshuggah, so it leaves very little time to make any money off it, at least not right now.
Plus you don’t want people coming in and moving your shit around.
(Laughs) Exactly.
So you mentioned how every band has a couple of tech nerds: are you one such tech nerd?
Not really. I know as much as I need to. You care about the stuff you do from a guitar standpoint, and I’m very specific about what kind of specs I’ve got for the custom guitars I get from Ibanez and stuff like that. And in the studio I know how things work so that I can be a part of the recording in a fruitful way, so to speak, but I’m not one of those guys who runs out and reads magazines and goes ‘Oh shit, have you seen this new hard drive?’ and goes mental about that. That’s more Fredrik’s stuff (laughs). But all of us guys in the band, we know a lot about how we’re set up in our studio because you kind of need to, you know?
Now, onto the 8-strings. How did that come about?
It was a long time ago – around 2000 I’d say, or maybe a little bit earlier. We’d always been 7-string players, and the only thing that differed with our setup as far as 7-strings went was we dropped the tuning down half a note: standard tuning but half a note down. That’s kind of a legacy from back in the day when it was more of a thrash metal oriented band, where you had to have the vocals in a certain range. But apart from that, the vision for the 8-strings, that was kind of an idea where we wanted to have an instrument that could be consistent in tone where, normally you would tune down a regular guitar and get that sloppy note out of it, but we wanted to take that baritone approach towards how the guitar would sound. There was this guy here in Sweden called Frederik, he has a brand called Nevborn. He approached us and said “I wouldn’t mind trying to build you an 8-string guitar because that’s one of the projects I’ve been working on, and I think it would really fit for what you guys want to do next.” So we tried it out and it really helped us in ways that we didn’t expect. What happened was, going down that low you had to change your approach to what you wanted to write. The guitar itself inspired the way of writing, instead of the other way around. All of a sudden we had this new tone, the single-string down-low playing that we hadn’t messed around with that much. On the old 7-string stuff we have a lot of single note riffs but it doesn’t come across the way it does on the 8-strings. So they’re very different beasts than a regular guitar. First of all, they’re pretty big. A lot of the custom-mades we have are 30” measures, so they’re pretty close to baritone range, and they were very liberating, I’d say. It opened up a new vista for us.
Your customs look cool! The body shape is a little different to the production 8-strings Ibanez recently came out with. They look more metal. How else do they differ from the production 8-string Ibanez?
Yeah. Looking the way they do and being such big guitars, it makes the body look a little bit different. But you were saying about the difference between the retail and the custom. The retail 8-string that Ibanez put out, it’s an RG. It’s a bolt-on neck, it’s standard scale, it’s more like you would play a 7-string. It doesn’t differ that much. You get a different tone, obviously, from having a lower range and more consistency out of the notes on the 8-string, but it’s not even close to the custom guitars. I don’t know how to explain: the difference between having the neck-through, the measure and everything, it just makes it a totally different guitar. And we’ve got the Lundgren pickups which Ibanez doesn’t run on the retail. So it would be unfair to compare the 8-string retail to the customs we’ve got.
Have you ever talked with Ibanez about making your guitars available to the public?
I’m actually going to discuss it with Mike Taft at Ibanez. We used to work with Rob Nishida at Ibanez and he quit after 14 years on the job. He wanted to try something new. So we’re gonna talk to Mike about that, because there’s a lot of people that seem to be interested in acquiring a custom 8-string in the setup we use. I think it might be a wise thing to maybe release some kind of limited edition. Because they’re pretty expensive guitars. It turns out to be that way when you spec it so hard. For some people the 8-string that came out as retail, it’ll probably suit some people better than our guitar, because ours takes some adjusting. But as well as those people who want to have a lower price tag, there are always people who are interested in getting the real deal, so we’ll see what can be done with that.
I’m a big Ibanez geek and I’m not alone – there will always be collectors who will buy something like that.
Yeah. It wouldn’t be a major series or anything, it would just be cool to put something out, but we will speak about that [with Ibanez]. We’ve been trying a lot of different approaches to how we want our guitars. The first ones we got were pretty close to perfect, then we started messing around a little bit with the specifics of the guitar, but we’re still looking to nail it about a thousand percent.
Amp-wise, what are you guys using? Or rather, what are you using instead of amps?
We’re running though Line 6. We’ve been using Line 6 Vetta II heads for the bass and the Pod Pros for the bass for the live sound. On the last couple of tours, as far as guitar amps go we’ve been using, well as you say, it’s not amps, but we’ve been using the AxeFX by Fractal Audio, but it’s a bit of a mish-mash as far as amps go. But the AxeFX as well as Line 6 have really helped us bring our tone to the stage without the hassle. We’re going DI so we’re heavily relying on the monitor system but it’s such an easy way to have everything in your little rack: you just plug it in and you have a consistent tone every night. You don’t have to worry about the house or anything like that, so that’s what we’re running through right now.
To my ears, even though the sound is distorted it doesn’t really sound like you’re not using an absolute shitload of distortion: there’s more punch there than you’d usually get with such a high level of gain gain.
We use quite a lot of distortion but I would say that what makes it come across as maybe a bit more clean and powerful is the 8-strings. They have a different tone, and the way the guitar resonates makes a tremendous difference on how you have your settings on the amp. I’d say it’s a combination of what you can get out of the Fractal Audio and what the guitar actually does. A lot of that single-string stuff tends to clean up the tone a little bit, y’know?
Okay, last question, and this is a bit off-topic, but the big news in metal this week is David Ellefson returning to Megadeth. Do you have any thoughts on that?
I didn’t know! I didn’t hear!
Yeah, he’s back!
I didn’t hear that! That’s awesome! It’s always cool when original people get back together. I mean, if you’re a new Megadeth fan who really likes the new stuff I guess it doesn’t really matter (laughs) but for me, it was the first three albums that I really listened to, and coming back to formula is probably something good in this respect. That’s cool!
CLICK HERE to buy Meshuggah albums from Riot!
LINK: Meshuggah.com, Ibanez.com, Soundwavefestival.com
Tour dates
Brisbane, Australia Feb 20 Soundwave Festival
Sydney, Australia Feb 21 Soundwave Festival
Sydney, Australia Feb 22 Manning Bar
Melbourne, Australia Feb 25 Billboard
Melbourne, Australia Feb 26 Soundwave Festival
Adelaide, Australia Feb 27 Soundwave Festival
Perth, Australia Mar 01 Soundwave Festival
Wellington, New Zealand Mar 03 SFBH
Auckland, New Zealand Mar 04 Transmission Room
Labels:
8-string,
David Ellefson,
Ibanez,
interview,
Marten Hagstrom,
Megadeth,
Meshuggah,
Nevborn
Wednesday, February 3, 2010
NAMM 2010: New pickups from Seymour Duncan
There was lots of great stuff on show at the Seymour Duncan booth at NAMM this year, and I was pretty excited to meet Evan Skopp and Rick Turner. Unfortuntately my booth visit didn't coincide with Yngwie's, but hey, there's a great interview with Yngwie by Evan a little bit down the page here, so I'll just enjoy that instead.
Here are Seymour Duncan's NAMM press releases, interspersed with videos where available:
YJM Fury
Santa Barbara, California Relentless pursuit of the perfect tone. We've all experienced it. It never subsides. When Yngwie said he wanted to take his tone to the next level, we listened. No other guitarist unleashes the fury like Yngwie J. Malmsteen. His influence is undeniable. His technique is unparalleled. His pickups? Seymour Duncan. Yngwie needs a pickup that responds to his unique playing style. After hundreds of hours of intense tone pursuit, their labor or love yielded the STK-S10 YJM Fury.
Beginning with Seymour's original Stack® pickup design, these hum-canceling single-coil-sized pickups were designed to meet Yngwie's personal tonal desires. The YJM series includes a dedicated bridge pickup and separate neck/middle pickup. It's recommended for neo-classical, shred, hard rock, power metal, and heavy metal. Dedicated bridge and neck/middle pickups represent two highly customized voices. In the bridge position, Yngwie wanted more aggression, more power. The neck pickup needed to balance Yngwie's fluid left hand technique with his broad mix of right hand pick attack. The result is a pickup that's sweet and fluid, but with more articulation and responsiveness to dynamics.
The YJM Fury is available with white, off-white, or black covers and can directly retrofit most single-coil equipped guitars. It also comes pre-installed in the signature series Fender® YJM Strat® guitar but works well with any guitar that utilizes traditional single-coil-size Strat pickups.
All Seymour Duncan and Basslines pickups, are hand built in the USA and include all necessary mounting hardware.
Fender and Strat are registered trademarks of FMIC with which Seymour Duncan is not affiliated.
Alnico II Pro Slash
Santa Barbara, California He is, by many accounts, history's all-time greatest guitar hero. With the ubiquitous top hat and shades, mop of black curls obscuring his face, and a blazing electric guitar tone blasting through a wall of amps, Slash epitomizes the very reasons we first air-strummed a low-slung tennis racquet in the privacy of our bedroom. He is the seminal rock guitar god. And for over three decades he has relied on Seymour Duncan pickups for his guitar tone. Now Seymour Duncan honors their guitar hero with his first signature pickup, the Alnico II Pro Slash.
The tone of this pickup will be familiar to all who have heard Slash's recorded tone. Though he has dozens of amazing guitars, since 1986 Slash has used pretty much one very special Les Paul® for all recording. The Alnico II Pro Slash was designed to give Slash's other Les Paul guitars-what he calls his "live guitars"-the exact tone of this legendary instrument.
Like the standard APH-1 Alnico II Pro, which he has used for years, the Slash model uses an Alnico 2 magnet. However, the Alnico II Pro Slash is wound with just enough boosted output to push a stock Les Paul toward the sweet sustain and rude crunch that characterizes Slash's sound as heard on hundreds of recordings. In addition, it comes with some of the same appointments found on the Duncan pickups in Slash's '86 recording axe, including single-conductor cable, long-legged bottom plate, and wooden spacer. For the true fan, or the player who wants to capture Slash's recorded tone, this pickup is a critical part of the tone chain.
While designed for use in a Les Paul, this pickup works well in any well-balanced humbucker-equipped guitar including hollow and semi-hollow body guitars. The Slash aficionado will use a pair of these pickups to capture that unmistakable tone. This pickup matches well with Seymour Duncan's SFX-04 Twin Tube Blue all-tube overdrive-distortion stompbox for singing leads and authoritative chording.
The Alnico II Pro Slash is hand built in Seymour Duncan's Santa Barbara, California workshop and including all mounting hardware.
Les Paul is a registered trademark of Gibson USA with which Seymour Duncan is not affiliated.
P-Rails Hot

Now, Seymour Duncan introduces the SHPR-2b P-Rails® Hot, delivering the same tonal flexibility as its predecessor, but specifically designed to provide a punchier, more aggressive tone in the bridge position. The P-Rails Hot features a beefed up coil wind and 2 powerful Alnico 8 magnets, which rival ceramic magnets in power but maintain the sweet sustain Alnico is known for. The P-90 coil in the P-Rails Hot is wound with a special wire type, selected for output and clarity. This P-90 is loud! The rail mode is hotter thanks to the power of the Alnico 8, and the series humbucker mode is huge!
P-Rails Hot are a direct humbucker retrofit and can be used in any guitar set up for a traditional humbucker or Trembucker spacing. To maximize P-Rails Hot's unique splitting capabilities and get the most tonal versatility, it is recommended for use in tandem with a standard P-Rails in the neck position with a two-way switch (push-pull or mini-toggle) to get both humbucker and P-90 tones. Use a three way switch (DPDT on-off-on) to bring in the single coil Rail tones. Or for the ultimate in versatility, use Seymour Duncan's Triple Shot switching mounting ring.
P-Rails Hot is recommended for all styles of music. They are built in the USA at the Seymour Duncan factory, come with black, white or cream covers
Vintage and Custom Staggered 7-String
Santa Barbara, California The Seymour Duncan Custom Shop has been custom-building 7-string electric pickups upon request for years. Now, to keep up with the demand for 7-string pickups, the company is introducing production versions of some of their most popular models, including the SSL-1 Vintage Staggered 7-string and the SSL-5 Custom Staggered 7-string, specifically designed with a modern stagger for the needs of the 7-string player.
The Vintage Staggered 7-string delivers a deep punchy tone with bright sparkle for single-coil strat.® guitars, recommended for country, pop, surf, rockabilly, blues, ska, classic rock and any player that wants to marry a vintage sound with the new era of 7-stringed guitars. Complete with hand-ground Alnico 5 magnets, it compliments a humbucker like the SH-4 JB 7-string in the bridge position, along with a neck pickup like the SH-1n '59 7-string. Add an all-tube overdrive like the Seymour Duncan SFX-11 Twin Tube Blue for the ultimate tone.
The Custom Staggered 7-string pickup provides a distinct vintage tone with greater sustain and full sounding harmonics that cuts through the mix, but cleans up nicely when you back off the volume. It's 6-string counterpart has been championed by countless artists over its long history for its strong, overwound Strat tone, most recently making an appearance on Fender's David Gilmour Signature Series Strat®. Pair this pickup with a high output bridge pickup like the SH-10 Full Shred 7-string, and a moderate output neck pickup like the SH-2n Jazz 7-string, for great tone when playing Texas blues rock, classic rock and heavy rock.
Both pickups come with a black cover, are produced at the Seymour Duncan factory in Santa Barbara California, and will make their debut in January at the 2010 NAMM show.
Fender and Strat are registered trademarks of FMIC with which Seymour Duncan is not affiliated.
Custom 5 and Full Shred 7-String
Santa Barbara, California Seymour Duncan is announcing the release of several of their most popular pick-ups, specifically re-designed to capture the deeper tones and wider range of sound found in the new generation of seven-stringed instruments, including the SH-10 Full Shred 7-string and the SH-14 Custom 5 7-String humbucker.
The 6-string Custom 5 was developed in part by contributors on the Seymour Duncan web user group forum who replaced the magnets in their Custom or Custom Custom with Alnico 5 magnets. The versatile Custom 5 7-string is a moderate to high output humbucker, perfect for pop, country, blues, classic rock and heavy rock with its deeper bottom end and expanded output. Recommended for the bridge position, add an SH-1n 7-string in the neck position for real deal P.A.F. tones.
Shredders and metal-heads will elate in the high output that the Full Shred 7-string offers. For years, the Seymour Duncan Full Shred has been revered for its top end clarity, crisp, well defined low end, and aggressive midrange, great for capturing clear, tight tone during heavy rhythms and speed riffs. Two symmetrical coils and short Allen head pole pieces produce a more intense, focused magnetic field while the Alnico 5 magnet maintains an organic attack and feel. The Full Shred is perfect for rock, heavy metal, speed metal, and any music featuring fast, aggressive, solo playing. It comes with a four-conductor hookup cable for various switching options, in both bridge and neck versions, and matches well with the SFX-04 Twin Tube Mayhem for ultimate heaviness.
Both pickups will debut in January at the 2010 NAMM show in Anaheim along with several other pick-ups redesigned by the Seymour Duncan company, to meet the growing fan base of seven-stringed guitar players.
Mick Thomson Signature Blackouts EMTY
Santa Barbara, CA -Seymour Duncan announces the release of the latest addition to our popular Blackouts Humbucker series the Blackouts AHB-3 Thomson EMTY. Like its predecessors (The AHB-1 and AHB-2), the Blackouts AHB-3 EMTY provides distinctive, screaming metal tones, packing a serious mid-range punch, thicker, darker chords than other humbuckers and hard-hitting driving leads. The 9-volt active Blackouts are designed specifically for more aggressive playing styles including players using extreme low tunings. The EMTY takes it a step further, created to meet Mick Thomson's personal specs and metal desires. Mick asked for tighter bottom, and more searing top end cut, and Seymour Duncan delivered.
The AHB series conveys a less compressed tone, with a more extended frequency response helping to cancel hum by using balanced inputs. Blackouts are up to 14dB quieter than any other active pickups, while producing more lows, more highs, and more output. Simply put, Blackouts have more tone than other active pickup. And players have noticed the benefits of the reduced hum, especially during recording. Thomson was already an avid fan of the Blackouts when he met Seymour Duncan Head of Artist Relations, Evan Skopp during a discreet backstage meeting at the 2008 Loud Park festival in Japan. Mick stayed involved every step of the way from the precise wiring configuration to the logo and printing on the pickup including his renowned "seven" imprinted right on the side of the cover. Now he depends on EMTY to execute his completely psychosocial tone that defines the Slipknot sound; because to play extreme metal, you need extreme metal tone.
AHB-3 Blackouts EMTY are available as Mick's two-humbucker set, or in individual neck and bridge models to mix and match with other Blackouts and Livewires Classic II active pickups. All versions come with all necessary mounting hardware, including pots, jack, and a battery clip. For players with active pickups already installed, the EMTY can plug right into the quick connection harness, making it a snap to unplug the old pickup and plug in the new EMTY.
To celebrate this new release, Seymour Duncan is giving fans the chance to win Mick Thomson's signature Ibanez© MTM1 with Mick's new signature Seymour Duncan Blackouts EMTY installed. Ten second place winners will receive signed sets of EMTY pickups and a host of third place winners get Slipknot or Seymour Duncan swag. To win, contestants need to go to: www.seymourduncan.com/mickblackouts and enter into the drawing. The contest runs to midnight January 31, 2010.
Seymour Duncan 8-string Blackouts
Santa Barbara, California - When six strings seem too conventional and seven strings still just aren't enough, Seymour Duncan announces the release of the latest version of our hugely successful Blackouts series, the 8-string Blackouts for 8-string guitars. For the new generation of 8-stringed guitars, 8-string Blackouts provide more headroom while still generating thick and full lows without sounding muddy or dull. Designed from the ground up specifically for the need of 8-string players, these metal beasts contain ceramic magnets for both the neck and bridge versions, specifically voiced for heavy rock with greater dynamic range, less scooped mids, and less compression than other active pickups.
For anyone who has tried to record using an 8 stringed guitar, the biggest complaint has been that most pickups deliver a thudy sound, chopping off the dynamic range. The results can be clearly seen, like a "flatline" effect in the recording wave. 8-string Blackouts allows each register to have its own character, like you expect from any six string sound, but now with deeper bass lines and no flat-lining. It simply allows the player be more expressive.
The industry agrees that 8-string Blackouts are clearly an improvement, evident by the fact that many guitar makers like Schecter© Guitars, who are delving into the 8-string guitar world, are offering the 8-string Blackouts. Their latest, offering the Schecter BlackJack ATC-8 limited edition guitar comes with 8-string Blackouts installed.
Like the full line of Blackouts, the 8-strings provide a tone that sounds less compressed with a more extended frequency response. Blackouts active humbuckers are up to 14dB quieter than the competition, but they also have more lows, more highs, and more output.
Blackouts 8-string are designed to direct retrofit any 8-string electric guitars and are available in individual neck and bridge models, or as a two-pickup set. All versions come with all necessary mounting hardware, including pots, jack, and a battery clip.
Seymour Duncan Serves Up A Triple Shot!
Santa Barbara, California - Guitarists are always striving to conjure as many sounds as possible out of their instrument. One of the ways to do so is by altering the wiring of the pickups to split coils (also known as a "coil cut") or change from series to parallel. Typically, when guitars are modified to add different pickup routing and tonal options, it's necessary to add extra toggle switches and/or push/pull pots. These extra controls can be confusing, unattractive, and in the way. In some cases, permanent modifications may also decrease the resale or collector's value of an instrument. What do you do if you need these options but don't want to modify your guitar's construction or appearance?
Seymour Duncan has developed a unique stealth switching system to do the job--the incredible Triple Shot which cleverly conceals the switching system inside a humbucker-size mounting ring. Now there's no need for drilling holes for extra switches, pots or visible modifications to achieve your custom wiring wishes. Two small switches built into the mounting ring are all that's needed to do the job.
The Triple Shot is easy to install and works with any four-conductor Seymour Duncan humbuckers, and just about any other manufacturer's four conductor pickups. Simply connect the pickup's leads to a small color-coded circuit board which adheres to the guitar's inside cavity, then connect the ground and hot wires to the circuit board and you're ready to rock. No fuss, no muss, no permanent modifications. Triple Shot is available in black and cream.
LINK: Seymourduncan.com
Here are Seymour Duncan's NAMM press releases, interspersed with videos where available:
YJM Fury
Beginning with Seymour's original Stack® pickup design, these hum-canceling single-coil-sized pickups were designed to meet Yngwie's personal tonal desires. The YJM series includes a dedicated bridge pickup and separate neck/middle pickup. It's recommended for neo-classical, shred, hard rock, power metal, and heavy metal. Dedicated bridge and neck/middle pickups represent two highly customized voices. In the bridge position, Yngwie wanted more aggression, more power. The neck pickup needed to balance Yngwie's fluid left hand technique with his broad mix of right hand pick attack. The result is a pickup that's sweet and fluid, but with more articulation and responsiveness to dynamics.
The YJM Fury is available with white, off-white, or black covers and can directly retrofit most single-coil equipped guitars. It also comes pre-installed in the signature series Fender® YJM Strat® guitar but works well with any guitar that utilizes traditional single-coil-size Strat pickups.
All Seymour Duncan and Basslines pickups, are hand built in the USA and include all necessary mounting hardware.
Fender and Strat are registered trademarks of FMIC with which Seymour Duncan is not affiliated.
Alnico II Pro Slash
The tone of this pickup will be familiar to all who have heard Slash's recorded tone. Though he has dozens of amazing guitars, since 1986 Slash has used pretty much one very special Les Paul® for all recording. The Alnico II Pro Slash was designed to give Slash's other Les Paul guitars-what he calls his "live guitars"-the exact tone of this legendary instrument.
Like the standard APH-1 Alnico II Pro, which he has used for years, the Slash model uses an Alnico 2 magnet. However, the Alnico II Pro Slash is wound with just enough boosted output to push a stock Les Paul toward the sweet sustain and rude crunch that characterizes Slash's sound as heard on hundreds of recordings. In addition, it comes with some of the same appointments found on the Duncan pickups in Slash's '86 recording axe, including single-conductor cable, long-legged bottom plate, and wooden spacer. For the true fan, or the player who wants to capture Slash's recorded tone, this pickup is a critical part of the tone chain.
While designed for use in a Les Paul, this pickup works well in any well-balanced humbucker-equipped guitar including hollow and semi-hollow body guitars. The Slash aficionado will use a pair of these pickups to capture that unmistakable tone. This pickup matches well with Seymour Duncan's SFX-04 Twin Tube Blue all-tube overdrive-distortion stompbox for singing leads and authoritative chording.
The Alnico II Pro Slash is hand built in Seymour Duncan's Santa Barbara, California workshop and including all mounting hardware.
Les Paul is a registered trademark of Gibson USA with which Seymour Duncan is not affiliated.
P-Rails Hot
Now, Seymour Duncan introduces the SHPR-2b P-Rails® Hot, delivering the same tonal flexibility as its predecessor, but specifically designed to provide a punchier, more aggressive tone in the bridge position. The P-Rails Hot features a beefed up coil wind and 2 powerful Alnico 8 magnets, which rival ceramic magnets in power but maintain the sweet sustain Alnico is known for. The P-90 coil in the P-Rails Hot is wound with a special wire type, selected for output and clarity. This P-90 is loud! The rail mode is hotter thanks to the power of the Alnico 8, and the series humbucker mode is huge!
P-Rails Hot are a direct humbucker retrofit and can be used in any guitar set up for a traditional humbucker or Trembucker spacing. To maximize P-Rails Hot's unique splitting capabilities and get the most tonal versatility, it is recommended for use in tandem with a standard P-Rails in the neck position with a two-way switch (push-pull or mini-toggle) to get both humbucker and P-90 tones. Use a three way switch (DPDT on-off-on) to bring in the single coil Rail tones. Or for the ultimate in versatility, use Seymour Duncan's Triple Shot switching mounting ring.
P-Rails Hot is recommended for all styles of music. They are built in the USA at the Seymour Duncan factory, come with black, white or cream covers
Vintage and Custom Staggered 7-String
The Vintage Staggered 7-string delivers a deep punchy tone with bright sparkle for single-coil strat.® guitars, recommended for country, pop, surf, rockabilly, blues, ska, classic rock and any player that wants to marry a vintage sound with the new era of 7-stringed guitars. Complete with hand-ground Alnico 5 magnets, it compliments a humbucker like the SH-4 JB 7-string in the bridge position, along with a neck pickup like the SH-1n '59 7-string. Add an all-tube overdrive like the Seymour Duncan SFX-11 Twin Tube Blue for the ultimate tone.
The Custom Staggered 7-string pickup provides a distinct vintage tone with greater sustain and full sounding harmonics that cuts through the mix, but cleans up nicely when you back off the volume. It's 6-string counterpart has been championed by countless artists over its long history for its strong, overwound Strat tone, most recently making an appearance on Fender's David Gilmour Signature Series Strat®. Pair this pickup with a high output bridge pickup like the SH-10 Full Shred 7-string, and a moderate output neck pickup like the SH-2n Jazz 7-string, for great tone when playing Texas blues rock, classic rock and heavy rock.
Both pickups come with a black cover, are produced at the Seymour Duncan factory in Santa Barbara California, and will make their debut in January at the 2010 NAMM show.
Fender and Strat are registered trademarks of FMIC with which Seymour Duncan is not affiliated.
Custom 5 and Full Shred 7-String
The 6-string Custom 5 was developed in part by contributors on the Seymour Duncan web user group forum who replaced the magnets in their Custom or Custom Custom with Alnico 5 magnets. The versatile Custom 5 7-string is a moderate to high output humbucker, perfect for pop, country, blues, classic rock and heavy rock with its deeper bottom end and expanded output. Recommended for the bridge position, add an SH-1n 7-string in the neck position for real deal P.A.F. tones.
Shredders and metal-heads will elate in the high output that the Full Shred 7-string offers. For years, the Seymour Duncan Full Shred has been revered for its top end clarity, crisp, well defined low end, and aggressive midrange, great for capturing clear, tight tone during heavy rhythms and speed riffs. Two symmetrical coils and short Allen head pole pieces produce a more intense, focused magnetic field while the Alnico 5 magnet maintains an organic attack and feel. The Full Shred is perfect for rock, heavy metal, speed metal, and any music featuring fast, aggressive, solo playing. It comes with a four-conductor hookup cable for various switching options, in both bridge and neck versions, and matches well with the SFX-04 Twin Tube Mayhem for ultimate heaviness.
Both pickups will debut in January at the 2010 NAMM show in Anaheim along with several other pick-ups redesigned by the Seymour Duncan company, to meet the growing fan base of seven-stringed guitar players.
Mick Thomson Signature Blackouts EMTY
The AHB series conveys a less compressed tone, with a more extended frequency response helping to cancel hum by using balanced inputs. Blackouts are up to 14dB quieter than any other active pickups, while producing more lows, more highs, and more output. Simply put, Blackouts have more tone than other active pickup. And players have noticed the benefits of the reduced hum, especially during recording. Thomson was already an avid fan of the Blackouts when he met Seymour Duncan Head of Artist Relations, Evan Skopp during a discreet backstage meeting at the 2008 Loud Park festival in Japan. Mick stayed involved every step of the way from the precise wiring configuration to the logo and printing on the pickup including his renowned "seven" imprinted right on the side of the cover. Now he depends on EMTY to execute his completely psychosocial tone that defines the Slipknot sound; because to play extreme metal, you need extreme metal tone.
AHB-3 Blackouts EMTY are available as Mick's two-humbucker set, or in individual neck and bridge models to mix and match with other Blackouts and Livewires Classic II active pickups. All versions come with all necessary mounting hardware, including pots, jack, and a battery clip. For players with active pickups already installed, the EMTY can plug right into the quick connection harness, making it a snap to unplug the old pickup and plug in the new EMTY.
To celebrate this new release, Seymour Duncan is giving fans the chance to win Mick Thomson's signature Ibanez© MTM1 with Mick's new signature Seymour Duncan Blackouts EMTY installed. Ten second place winners will receive signed sets of EMTY pickups and a host of third place winners get Slipknot or Seymour Duncan swag. To win, contestants need to go to: www.seymourduncan.com/mickblackouts and enter into the drawing. The contest runs to midnight January 31, 2010.
Seymour Duncan 8-string Blackouts
For anyone who has tried to record using an 8 stringed guitar, the biggest complaint has been that most pickups deliver a thudy sound, chopping off the dynamic range. The results can be clearly seen, like a "flatline" effect in the recording wave. 8-string Blackouts allows each register to have its own character, like you expect from any six string sound, but now with deeper bass lines and no flat-lining. It simply allows the player be more expressive.
The industry agrees that 8-string Blackouts are clearly an improvement, evident by the fact that many guitar makers like Schecter© Guitars, who are delving into the 8-string guitar world, are offering the 8-string Blackouts. Their latest, offering the Schecter BlackJack ATC-8 limited edition guitar comes with 8-string Blackouts installed.
Like the full line of Blackouts, the 8-strings provide a tone that sounds less compressed with a more extended frequency response. Blackouts active humbuckers are up to 14dB quieter than the competition, but they also have more lows, more highs, and more output.
Blackouts 8-string are designed to direct retrofit any 8-string electric guitars and are available in individual neck and bridge models, or as a two-pickup set. All versions come with all necessary mounting hardware, including pots, jack, and a battery clip.
Seymour Duncan Serves Up A Triple Shot!
Seymour Duncan has developed a unique stealth switching system to do the job--the incredible Triple Shot which cleverly conceals the switching system inside a humbucker-size mounting ring. Now there's no need for drilling holes for extra switches, pots or visible modifications to achieve your custom wiring wishes. Two small switches built into the mounting ring are all that's needed to do the job.
The Triple Shot is easy to install and works with any four-conductor Seymour Duncan humbuckers, and just about any other manufacturer's four conductor pickups. Simply connect the pickup's leads to a small color-coded circuit board which adheres to the guitar's inside cavity, then connect the ground and hot wires to the circuit board and you're ready to rock. No fuss, no muss, no permanent modifications. Triple Shot is available in black and cream.
LINK: Seymourduncan.com
Labels:
7-string,
8-string,
Mick Thompson,
NAMM 2010,
Seymour Duncan,
Slash,
YJM,
Yngwie Malmsteen
Wednesday, January 20, 2010
NAMM 2010: Taylor Baritone 8-string acoustic
I spent quite a bit of time geeking out over Taylor at NAMM (look for a photo special soon, and I'm taking the factory tour tomorrow!), and one of the coolest products I saw was this incredible Baritone 8-string acoustic. Tuned B to B, the middle two strings are doubled an octave higher for subtle 12-string effects. I spent a bit of time playing it and I found it quite intuitive: because only two strings are doubled, you don't get that same 'I'm playing on a cheese grater ... I prolly shouldn't be doing this' feel you get from a full 12-string. Now, as someone who plays a lot of 7-string, I can really see this guitar fitting quite nicely indeed into my recordings, adding some punch to the low end and some zing to the top at the same time.
Another awesome thing about this guitar is that while I was playing it, John Petrucci strolled in to the Taylor booth. He remembered me from our recent interview (at least he said he did - maybe he was just being polite. Man that dude's nice), and I showed him the guitar and told him how freaking awesome it is. Who knows, maybe he'll pick one up and work it into some future music?
Anyway, here's the press release:
Taylor Guitars Introduces the Baritone 8-String Guitar
ANAHEIM, Calif. - January 14, 2010 - Born from a love of tone and a passion for innovation, Taylor Guitars has expanded the possibilities of guitar voicing in its new model, the Baritone 8-String. With a bold, fresh sound, the Baritone 8-String broadens the tonal spectrum, giving players a rich musical palette that promises to uncork new inspiration of musical harmony. Featuring a Grand Symphony body with a richly hued back and sides of Indian rosewood topped with Sitka spruce, the Baritone 8-String embodies the spirit of a traditional baritone guitar paired with Taylor's quality craftsmanship and product innovation. The model features a longer-scaled 27-inch neck and Taylor-designed baritone bracing. The guitar is tuned from B to B and features additional octave strings paired along with the third and fourth (D and A) strings. This feature gives players an extended range of sounds, without compromising tonal integrity or playability.
The Baritone 8-String came to be as Taylor's product development team was deep in the throes of designing several series of 35th Anniversary guitars, including a 6-string baritone (XXXV-B) and a 9-string guitar (XXXV-9). The team decided to experiment by creating a hybrid of the two, as Bob Taylor explains. "We loved the traditional baritone, but missed having some of that upper register. We thought, what if we turned it into a 9-string baritone? So, we made one. But after deciding it was a little too jangly, we pulled off the [doubled second] string, leaving the third and fourth octave strings. It sounded awesome."
Adding the two octave strings, Taylor says, transformed the baritone. "It's a whole new ballgame. It's really, really cool because you can either accentuate those octaves or stay away from them. The beauty of this guitar is that it goes low and those two strings brighten it up, but they don't sound too 'octave-y'. It doesn't give you that 12-string effect as much as it really just extends the range because, as a baritone, the octaves aren't really high. It fills the guitar out and gives it a nice (tonal) spread."
The Baritone 8-String is tuned a fourth below standard guitar tuning, allowing the player to play songs in a lower register. In terms of the playing experience, Taylor's David Hosler, a member of the product development team, compares the tonal properties of the 8-string baritone to a blend of three different instruments. "When I hear it, I feel like I'm hearing a 6-string, a bass, and a bit of 12-string all in one guitar," he says. "In giving it a good listen, it sounds like standard and alternate tuning at the same time."
The product development team at Taylor isn't the only group excited about the new model. Taylor-strumming dealers, from metal players to singer-songwriters, are lining up to play and share the experience with their customers. Matt Clancy, from Craig's Music in Weatherford, Texas sampled the 8-string during a fall Taylor Road Show event. As a heavy metal musician, he was blown away with the "bigness of the tone." In fact, he says his favorite thing about the guitar is the tonal fullness he gets from a single strum. "When you're playing regular chords on the 8-string, there's so much more body, especially with octave strings," he elaborates. "It opens up the way minor chords sound, and they sound huge on it. It's a great guitar for guys who do metal and some acoustic rock, as it's perfect for power chords, and for some jazz too, especially if they like playing in low B. It's a guitar that's filled with big, tonal goodness. It adds a depth that you can't get from any other guitar on the market right now."
Evan Carmen, a Taylor dealer from Morgan Music in Eau Claire, Wisconsin, had the chance to play an 8-string prototype during a recent visit to the Taylor factory. As an acoustic singer-songwriter, Carmen is sure this guitar will be an addition to his collection. "There is practical application in nearly every style and genre I can think of," he says. "It's only a matter of time before it starts changing music forever. I can't wait to see how people react to it right out of the gate. No doubt, we'll be hearing it used frequently after people catch wind of what it's capable of. I can't wait to have one of my own."
As enchanting as the guitar is to play and listen to, it's equally attractive visually. The model's appointments include a mother-of-pearl peghead inlay and delicate diamond-shaped fretboard inlays, a three-ring abalone rosette, and abalone-dotted bridge pins. Premium features include Indian rosewood binding, a bone nut and saddle, and an all-gloss finish. Amplified with the Taylor Expression System® pickup and strung with ELIXIR® Baritone strings, the model is also offered in a standard 6-string version.
Available at authorized domestic and international Taylor dealers in mid-winter, the Baritone 8-String will be offered at a suggested retail price of $3,998 and the Baritone 6-String at $3,798. Players looking to keep their baritone guitar equipped with ELIXIR strings® can purchase them through TaylorWare, the company's online store of Taylor-branded clothing, accessories and gear.
To experience the company's new guitars, artist performances, or to learn more about Taylor Guitars, please visit the Taylor Guitars booth on the second floor of the Anaheim Convention Center, Room 213.
For additional information about the Baritone guitars, please visit
www.taylorguitars.com
For Taylor Guitars news, please visit
www.taylorguitars.com/news
Thursday, September 17, 2009
NEWS: More Schecter 8-strings
Wow, Schecter's really getting on board the 8-string thing. Check these out! They'll be available in early October at authorized Schecter dealers, and only 50 of each will be produced!
FEATURES
*26.5” Extended Scale
*EMG Active 808 Humbucker(s)
* Custom Hipshot Bridge
* Custom Inlays
* Tuned F#/B/E/A/D/G/B/E
HELLRAISER DEVIL-8 US$1299.00 MSRP
DEVIL SPINE-8 US$1199.00 MSRP

FEATURES*26.5” Extended Scale
*EMG Active 808 Humbucker(s)
* Custom Hipshot Bridge
* Custom Inlays
* Tuned F#/B/E/A/D/G/B/E
HELLRAISER DEVIL-8 US$1299.00 MSRP
DEVIL SPINE-8 US$1199.00 MSRP
And strings!

Saturday, July 25, 2009
NEWS: New Schecter 8 strings!
Oh my god, look at these! Not only are these beauties available in several styles (the Blackjack C-8 is superstrat-shaped, while the Hellraiser V-8 is a freaking V!), there are several colour options and even a left-handed one. Schecter should really be applauded for getting so heavily into the 8-string thing and not leaving lefties behind.

These guitars are en route to retailers now, and as soon as they're available I'll update my 8 Is Enough ...For Now article about 8 string guitars. In the meantime here are a couple of 6-string Schecter reviews for you to sink your teeth into:
Friday, March 6, 2009
FEATURE: 8 Is Enough… for now - Production 8-string guitars
The 8 string electric guitar isn’t a totally new phenomenon – Meshuggah fans have been lusting after their own readily available version for years now – but since Ibanez made the brave move into the mass-produced world of the low F# string, other companies have stepped up with their own monstrous creations. Here are a few readily available production 8 strings. All feature EMG 808 active pickups, and all are tuned F#-B-E-A-D-G-B-E at the factory, but of course you’re free to come up with your own tunings. Personally, I’d probably drop the F# down to E. You’ve already gone down that far, why not get all the way down to bass territory? Then again, following that philosophy, I’d probably want a 9 string so I can go as low as a 5 string bass… Hehehe.
Ibanez RG2228
SPECS:
basswood body, 5-piece maple/wenge neck w/rosewood fretboard,
24 jumbo frets
27” Scale
Gotoh Tuners
Edge III-8 fixed bridge,
2x EMG 808 pickups
CLICK HERE to see the Ibanez RG2228 on eBay.
ESP LTD FM-418
SPECS:
Neck-Thru-Body
Basswood Body, Maple Neck w/ Rosewood Fretboard
24 XJ Frets
25.5" Scale
Grover Tuners
Hipshot Fixed Bridge
EMG 808 pickups
CLICK HERE to see the ESP LTD FM-418 on eBay.
Schecter Hellraiser C-8
SPECS:
Manhgay body, Mahogany Neck w/Rosewood Fretboard
26.5” Scale
Schecter Locking Tuners
Hipshot Fixed Bridge
EMG 808 Pickups
CLICK HERE to see the Schecter Hellraiser C-8 on eBay.
Ibanez RG2228
SPECS:basswood body, 5-piece maple/wenge neck w/rosewood fretboard,
24 jumbo frets
27” Scale
Gotoh Tuners
Edge III-8 fixed bridge,
2x EMG 808 pickups
CLICK HERE to see the Ibanez RG2228 on eBay.
ESP LTD FM-418
SPECS:Neck-Thru-Body
Basswood Body, Maple Neck w/ Rosewood Fretboard
24 XJ Frets
25.5" Scale
Grover Tuners
Hipshot Fixed Bridge
EMG 808 pickups
CLICK HERE to see the ESP LTD FM-418 on eBay.
Schecter Hellraiser C-8
SPECS:Manhgay body, Mahogany Neck w/Rosewood Fretboard
26.5” Scale
Schecter Locking Tuners
Hipshot Fixed Bridge
EMG 808 Pickups
CLICK HERE to see the Schecter Hellraiser C-8 on eBay.
Friday, January 30, 2009
NAMM 2009: Schecter 8-string
This just landed in my inbox... now THAT'S the stuff. Want!!!The new Schecter Hellraiser C-8 has 8 strings (the lowest is tuned down to F#, but I figure that if you're going to go that low anyway, you might as well tune it down to E so you can play octave-down power chords, Drop-D-style.
By the way, check out that ad copy: "A custom designed Hip-Shot bridge that DOES intonate..." Who could they be taking a dig at there? The only other production 8 strings I know of are the
Ibanez RG2228
, which has the genius FXEdge bridge, and the ESP/LTD Stephen Carpenter models. Hmmm...
Ibanez RG2228
Subscribe to:
Posts (Atom)



